General Industrial Products Supplier in India

Cable ties commonly come in lengths from 100 mm to 300 mm or more, in widths from about 2.5 mm to 9 mm, chosen by the bundle diameter and the load they need to hold.

Use a stainless steel cable tie for outdoor, high-temperature, or UV-exposed installations where nylon would become brittle over time. Nylon ties suit indoor, general-purpose cable bundling.

An eye bolt is a bolt with a looped head used for lifting, rigging and anchoring loads with a rope, chain or shackle. It must be rated for the load weight and fitted correctly to the direction of pull.

A U bolt is a U-shaped fastener used to clamp pipes, rods or cylindrical objects to a flat surface or bracket. It is common in pipe supports, exhaust mounts and structural fixing.

A lifting eye bolt is rated and tested for overhead lifting with a defined safe working load, while a regular eye bolt may only be rated for static anchoring, not dynamic lifting. Always check the load rating before lifting.

Lubricant oil is a liquid that flows to coat moving parts, while grease is oil thickened with a soap or other agent so it stays in place, giving longer-lasting protection in bearings and joints that are hard to re-oil often.

Lithium grease is a general-purpose industrial grease used to lubricate bearings, hinges, and sliding or rotating machine parts, valued for good water resistance and a wide working temperature range.

Use a high-temperature grease on bearings, chains or joints near furnaces, ovens or motors that run hot, since standard grease can melt or break down and stop protecting the part.

An O-ring is a circular rubber or elastomer seal with a round cross-section, fitted into a groove to seal the gap between two mating parts and stop fluid or gas from leaking. It is one of the simplest and most widely used industrial seals.

O-rings are commonly made from nitrile (NBR) for oil and fuel, EPDM for water and steam, Viton (FKM) for high heat and chemicals, and silicone for food-grade or extreme temperature use. The material is chosen by the fluid and temperature.

Find the right O-ring size by measuring its inside diameter and cross-section thickness, or by matching it to a standard size chart such as AS568. The groove dimensions on the equipment also guide the correct size.

A metallic gasket handles high pressure and high temperature using a metal and filler construction, while a non-metallic gasket uses rubber, PTFE or fibre for general and chemical-resistant sealing at lower pressure. Metallic suits critical joints; non-metallic suits general process piping.

A hex nut is used to thread onto a bolt or stud and clamp two parts together, giving a strong, wrench-friendly grip for structural and mechanical joints. It comes in standard and heavy duty types.

Yes, Dhyami supplies gaskets, fasteners, cable ties, eye bolts, grease and O-rings in bulk for plants and projects across India. Share your requirement and quantity for the best price.

Dhyami is a trusted general industrial products supplier in India, offering gaskets, fasteners, cable ties, eye bolts, U bolts, industrial grease and O-rings at the best price. We deliver across India with fast dispatch and expert product selection.