Industrial Tools Supplier in India

The main types of spanner are ring, open-end (box), combination, ratchet, socket and adjustable spanners. Ring spanners fully surround the bolt head for a strong grip; open-end spanners fit sideways onto tight spaces.

In most of the world "spanner" and "wrench" mean the same hand tool, but in American English "wrench" is the common word and "spanner" is used mainly for the adjustable or specialty type. Both grip and turn nuts and bolts.

A ball peen hammer is used for metalworking tasks such as shaping metal, striking punches and chisels, and peening (work-hardening) rivets and metal surfaces. The rounded end is used for peening; the flat end for general striking.

A claw hammer is a lighter, general-purpose hammer with a claw for pulling nails, while a sledge hammer is much heavier and used for demolition, driving stakes and heavy striking work with both hands.

Use a rubber mallet when you need to strike a surface without marking, denting or damaging it, such as fitting parts, tapping wood joints or working on finished panels. A steel hammer would leave marks on these surfaces.

A pipe vice is a clamping tool, usually bench or stand mounted, that holds a pipe firmly in place while it is cut, threaded or fitted. Its curved jaws grip round pipe securely without crushing it.

A pipe vice works by closing two curved, serrated jaws around the pipe using a screw or lever, gripping it tightly so it will not rotate or slip while being worked on.

A pipe vice has curved jaws shaped to grip round pipe securely, while a standard bench vice has flat jaws for gripping flat or square stock. Some vices combine both jaw types for versatility.

A socket set is a collection of socket wrench heads in different sizes, used with a ratchet handle to tighten or loosen nuts and bolts quickly. Sets commonly come in 1/4 inch, 3/8 inch and 1/2 inch drive sizes.

An impact socket is made from tougher, thicker steel to withstand the sudden force of an impact wrench, while a regular socket is designed for hand-ratchet use only and can crack under impact force.

Use a 1/4 inch drive set for small fasteners and precision work, a 3/8 inch drive for general workshop use, and a 1/2 inch drive for larger, high-torque bolts. Many workshops keep all three.

A wrench set is used to tighten and loosen nuts and bolts of different sizes with one complete kit, combining combination, ring and open end spanners in graded sizes for general fastening work.

Clamps are used to hold a workpiece firmly in place against a bench or another part during cutting, drilling, gluing or assembly. Common types are G-clamps, F-clamps and C-clamps, chosen by the opening size needed.

A punch set is used to mark metal before drilling, punch holes and drive out pins and rivets. Center punches start drill holes accurately, while pin punches remove pins without damaging surrounding parts.

Yes, Dhyami supplies wrench sets, spanners, hammers, pipe vices and socket sets in bulk for workshops, factories and projects across India. Share your requirement and quantity for the best price.

Dhyami is a trusted industrial tools supplier in India, offering wrench sets, adjustable spanners, pliers, hammers, pipe vices and socket sets at the best price. We deliver across India with fast dispatch and expert product selection.